module config_base !use netcdf_layer_base use module_hydro_stop, only:HYDRO_stop implicit none integer, PARAMETER :: MAX_SOIL_LEVELS = 10 ! maximum soil levels in namelist !REAL :: DTBL ! timestep [s] type NOAHLSM_OFFLINE_ character(len=256) :: indir integer :: nsoil ! number of soil layers integer :: crocus_opt = 0 integer :: act_lev = 0 integer :: forcing_timestep integer :: noah_timestep integer :: start_year integer :: start_month integer :: start_day integer :: start_hour integer :: start_min character(len=256) :: outdir = "." character(len=256) :: restart_filename_requested = " " integer :: restart_frequency_hours integer :: output_timestep integer :: dynamic_veg_option integer :: canopy_stomatal_resistance_option integer :: btr_option integer :: runoff_option integer :: surface_drag_option integer :: supercooled_water_option integer :: frozen_soil_option integer :: radiative_transfer_option integer :: snow_albedo_option integer :: pcp_partition_option integer :: tbot_option integer :: temp_time_scheme_option integer :: glacier_option integer :: surface_resistance_option character(len=256) :: forcing_name_T character(len=256) :: forcing_name_Q character(len=256) :: forcing_name_U character(len=256) :: forcing_name_V character(len=256) :: forcing_name_P character(len=256) :: forcing_name_LW character(len=256) :: forcing_name_SW character(len=256) :: forcing_name_PR character(len=256) :: forcing_name_SN character(len=256) :: forcing_name_LF integer :: soil_data_option = 1 integer :: pedotransfer_option = 0 integer :: crop_option = 0 integer :: imperv_option = 9 integer :: split_output_count = 1 integer :: khour integer :: kday = -999 real :: zlvl character(len=256) :: hrldas_setup_file = " " character(len=256) :: mmf_runoff_file = " " character(len=256) :: external_veg_filename_template = " " character(len=256) :: external_lai_filename_template = " " integer :: xstart = 1 integer :: ystart = 1 integer :: xend = 0 integer :: yend = 0 REAL, DIMENSION(MAX_SOIL_LEVELS) :: soil_thick_input ! depth to soil interfaces from namelist [m] integer :: rst_bi_out, rst_bi_in !0: default netcdf format. 1: binary write/read by each core. CHARACTER(LEN = 256) :: spatial_filename end type NOAHLSM_OFFLINE_ type WRF_HYDRO_OFFLINE_ integer :: finemesh integer :: finemesh_factor integer :: forc_typ integer :: snow_assim end type WRF_HYDRO_OFFLINE_ TYPE namelist_rt_ integer :: nsoil, SOLVEG_INITSWC integer :: act_lev = 0 real,allocatable,dimension(:) :: ZSOIL8 real*8 :: out_dt, rst_dt real :: dt !! dt is NOAH_TIMESTEP integer :: START_YEAR, START_MONTH, START_DAY, START_HOUR, START_MIN character(len=256) :: restart_file = "" integer :: split_output_count integer :: igrid integer :: rst_bi_in ! used for parallel io with large restart file. integer :: rst_bi_out ! used for parallel io with large restart file. ! each process will output the restart tile. character(len=256) :: geo_static_flnm = "" character(len=1024) :: land_spatial_meta_flnm = "" integer :: DEEPGWSPIN integer :: order_to_write, rst_typ character(len=256) :: upmap_file = "" ! user defined mapping file for NHDPLUS character(len=256) :: hydrotbl_f = "" ! hydrotbl file ! additional character character :: hgrid character(len=19) :: olddate="123456" character(len=19) :: startdate="123456" character(len=19) :: sincedate="123456" integer :: io_config_outputs ! used for NCEP REALTIME OUTPUT integer :: io_form_outputs ! Flag to turn specify level of internal compression integer :: t0OutputFlag integer :: channel_only, channelBucket_only integer :: output_channelBucket_influx ! used for FORCE_TYPE 9 and 10 integer:: RT_OPTION, CHANRTSWCRT, channel_option, & SUBRTSWCRT,OVRTSWCRT,AGGFACTRT, & GWBASESWCRT, GW_RESTART,RSTRT_SWC,TERADJ_SOLAR, & sys_cpl, gwChanCondSw, GwPreCycles, GwSpinCycles, GwPreDiagInterval, & gwsoilcpl, UDMP_OPT logical:: GwPreDiag, GwSpinUp real:: DTRT_TER,DTRT_CH, DTCT, dxrt0, gwChanCondConstIn, gwChanCondConstOut, gwIhShift character(len=256) :: route_topo_f="" character(len=256) :: route_chan_f="" character(len=256) :: route_link_f="" character(len=256) :: route_lake_f="" integer :: lake_option logical :: reservoir_persistence_usgs logical :: reservoir_persistence_usace character(len=256) :: reservoir_parameter_file="" character(len=256) :: reservoir_usgs_timeslice_path="" character(len=256) :: reservoir_usace_timeslice_path="" integer :: reservoir_observation_lookback_hours = 18 integer :: reservoir_observation_update_time_interval_seconds = 86400 logical :: reservoir_rfc_forecasts character(len=256) :: reservoir_rfc_forecasts_time_series_path="" integer :: reservoir_rfc_forecasts_lookback_hours logical :: reservoir_type_specified character(len=256) :: route_direction_f="" character(len=256) :: route_order_f="" character(len=256) :: gwbasmskfil ="" character(len=256) :: gwstrmfil ="" character(len=256) :: geo_finegrid_flnm ="" character(len=256) :: udmap_file ="" character(len=256) :: GWBUCKPARM_file = "" integer :: reservoir_data_ingest ! STUB FOR USE OF REALTIME RESERVOIR DISCHARGE DATA. CURRENTLY NOT IN USE. character(len=1024) :: reservoir_obs_dir = "" logical :: compound_channel integer ::frxst_pts_out ! ASCII point timeseries output at user specified points integer ::CHRTOUT_DOMAIN ! Netcdf point timeseries output at all channel points integer ::CHRTOUT_GRID ! Netcdf grid of channel streamflow values integer ::CHANOBS_DOMAIN ! NetCDF point timeseries of output at forecast/gage points integer ::LSMOUT_DOMAIN ! Netcdf grid of variables passed between LSM and routing components integer ::RTOUT_DOMAIN ! Netcdf grid of terrain routing variables on routing grid integer ::output_gw ! Netcdf grid of GW integer ::outlake ! Netcdf grid of lake integer :: rtFlag integer ::khour integer :: channel_loss_option = 0 character(len=256) :: nudgingParamFile character(len=256) :: netwkReExFile logical :: readTimesliceParallel logical :: temporalPersistence logical :: persistBias logical :: biasWindowBeforeT0 character(len=256) :: nudgingLastObsFile integer :: minNumPairsBiasPersist integer :: maxAgePairsBiasPersist logical :: invDistTimeWeightBias logical :: noConstInterfBias character(len=256) :: timeSlicePath integer :: nLastObs integer :: bucket_loss integer :: imperv_adj logical :: channel_bypass = .FALSE. contains procedure, pass(self) :: check => rt_nlst_check END TYPE namelist_rt_ type, public :: Configuration_ contains procedure, nopass :: init => config_init procedure, nopass :: init_nlst => init_namelist_rt_field end type Configuration_ type crocus_options integer :: crocus_opt = 0 integer :: act_lev = 0 end type crocus_options integer, parameter :: max_domain = 5 type(NOAHLSM_OFFLINE_), protected, save :: noah_lsm type(WRF_HYDRO_OFFLINE_), protected, save :: wrf_hydro type(namelist_rt_), dimension(max_domain), save :: nlst contains subroutine config_init() implicit none integer, parameter :: did = 1 call init_noah_lsm_and_wrf_hydro() end subroutine config_init subroutine rt_nlst_check(self) ! Subroutine to check namelist options specified by the user. implicit none class(namelist_rt_) self ! Local variables logical :: fileExists = .false. integer :: i ! ! Go through and make some logical checks for each hydro.namelist option. ! ! Some of these checks will depend on specific options chosen by the user. if ( (self%sys_cpl .lt. 1) .or. (self%sys_cpl .gt. 4) ) then call hydro_stop("hydro.namelist ERROR: Invalid sys_cpl value specified.") endif if (len(trim(self%geo_static_flnm)) .eq. 0) then call hydro_stop("hydro.namelist ERROR: Please specify a GEO_STATIC_FLNM file.") else inquire(file=trim(self%geo_static_flnm),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: GEO_STATIC_FLNM not found.') endif if (len(trim(self%geo_finegrid_flnm)) .eq. 0) then call hydro_stop("hydro.namelist ERROR: Please specify a GEO_FINEGRID_FLNM file.") else inquire(file=trim(self%geo_finegrid_flnm),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: GEO_FINEGRID_FLNM not found.') endif !if(len(trim(self%land_spatial_meta_flnm)) .eq. 0) then ! call hydro_stop("hydro.namelist ERROR: Please specify a LAND_SPATIAL_META_FLNM file.") !else ! inquire(file=trim(self%land_spatial_meta_flnm),exist=fileExists) ! if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: LAND_SPATIAL_META_FLNM not found.') !endif if (len(trim(self%RESTART_FILE)) .ne. 0) then inquire(file=trim(self%RESTART_FILE),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR:= Hydro RESTART_FILE not found.') endif if (self%igrid .le. 0) call hydro_stop('hydro.namelist ERROR: Invalid IGRID specified.') if (self%out_dt .le. 0) call hydro_stop('hydro_namelist ERROR: Invalid out_dt specified.') if ((self%split_output_count .lt. 0 ) .or. (self%split_output_count .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid SPLIT_OUTPUT_COUNT specified') endif if ((self%rst_typ .lt. 0 ) .or. (self%rst_typ .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid rst_typ specified') endif if ((self%rst_bi_in .lt. 0 ) .or. (self%rst_bi_in .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid rst_bi_in specified') endif if ((self%rst_bi_out .lt. 0 ) .or. (self%rst_bi_out .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid rst_bi_out specified') endif if ((self%RSTRT_SWC .lt. 0 ) .or. (self%RSTRT_SWC .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid RSTRT_SWC specified') endif if ((self%GW_RESTART .lt. 0 ) .or. (self%GW_RESTART .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid GW_RESTART specified') endif if ((self%order_to_write .lt. 1 ) .or. (self%order_to_write .gt. 12) ) then call hydro_stop('hydro.namelist ERROR: Invalid order_to_write specified') endif if ((self%io_form_outputs .lt. 0 ) .or. (self%io_form_outputs .gt. 4) ) then call hydro_stop('hydro.namelist ERROR: Invalid io_form_outputs specified') endif if ((self%io_config_outputs .lt. 0 ) .or. (self%io_config_outputs .gt. 6) ) then call hydro_stop('hydro.namelist ERROR: Invalid io_config_outputs specified') endif if ((self%t0OutputFlag .lt. 0 ) .or. (self%t0OutputFlag .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid t0OutputFlag specified') endif if ((self%output_channelBucket_influx .lt. 0 ) .or. (self%output_channelBucket_influx .gt. 3) ) then call hydro_stop('hydro.namelist ERROR: Invalid output_channelBucket_influx specified') endif if ((self%CHRTOUT_DOMAIN .lt. 0 ) .or. (self%CHRTOUT_DOMAIN .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid CHRTOUT_DOMAIN specified') endif if ((self%CHANOBS_DOMAIN .lt. 0 ) .or. (self%CHANOBS_DOMAIN .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid CHANOBS_DOMAIN specified') endif if ((self%CHRTOUT_GRID .lt. 0 ) .or. (self%CHRTOUT_GRID .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid CHRTOUT_GRID specified') endif if ((self%LSMOUT_DOMAIN .lt. 0 ) .or. (self%LSMOUT_DOMAIN .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid LSMOUT_DOMAIN specified') endif if ((self%RTOUT_DOMAIN .lt. 0 ) .or. (self%RTOUT_DOMAIN .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid RTOUT_DOMAIN specified') endif if ((self%output_gw .lt. 0 ) .or. (self%output_gw .gt. 2) ) then call hydro_stop('hydro.namelist ERROR: Invalid output_gw specified') endif if ((self%outlake .lt. 0 ) .or. (self%outlake .gt. 2) ) then call hydro_stop('hydro.namelist ERROR: Invalid outlake specified') endif if ((self%frxst_pts_out .lt. 0 ) .or. (self%frxst_pts_out .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid frxst_pts_out specified') endif if (self%TERADJ_SOLAR .ne. 0) then call hydro_stop('hydro.namelist ERROR: Invalid TERADJ_SOLAR specified') endif ! The default value of nsoil == -999. When channel-only is used, ! nsoil == -999999. In the case of channel-only, skip following block of code. if (self%NSOIL .le. 0 .and. self%NSOIL .ne. -999999) then call hydro_stop('hydro.namelist ERROR: Invalid NSOIL specified.') endif do i = 1,self%NSOIL if (self%ZSOIL8(i) .gt. 0) then call hydro_stop('hydro.namelist ERROR: Invalid ZSOIL layer depth specified.') endif if (i .gt. 1) then if (self%ZSOIL8(i) .ge. self%ZSOIL8(i-1)) then call hydro_stop('hydro.namelist ERROR: Invalid ZSOIL layer depth specified.') endif endif end do if (self%NSOIL .le. 0 .and. self%NSOIL .ne. -999999) then call hydro_stop('hydro.namelist ERROR: Invalid NSOIL specified.') endif if (self%dxrt0 .le. 0) then call hydro_stop('hydro.namelist ERROR: Invalid DXRT specified.') endif if (self%AGGFACTRT .le. 0) then call hydro_stop('hydro.namelist ERROR: Invalid AGGFACTRT specified.') endif if (self%DTRT_CH .le. 0) then call hydro_stop('hydro.namelist ERROR: Invalid DTRT_CH specified.') endif if (self%DTRT_TER .le. 0) then call hydro_stop('hydro.namelist ERROR: Invalid DTRT_TER specified.') endif if ((self%SUBRTSWCRT .lt. 0 ) .or. (self%SUBRTSWCRT .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid SUBRTSWCRT specified') endif if ((self%OVRTSWCRT .lt. 0 ) .or. (self%OVRTSWCRT .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid OVRTSWCRT specified') endif if ((self%OVRTSWCRT .eq. 1 ) .or. (self%SUBRTSWCRT .eq. 1) ) then if( (self%rt_option .lt. 1 ) .or. (self%rt_option .gt. 2) ) then !if(self%rt_option .ne. 1) then call hydro_stop('hydro.namelist ERROR: Invalid rt_option specified') endif endif if ((self%CHANRTSWCRT .lt. 0 ) .or. (self%CHANRTSWCRT .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid CHANRTSWCRT specified') endif if (self%CHANRTSWCRT .eq. 1) then if (self%channel_option .eq. 5 ) then self%channel_option = 2 self%channel_bypass = .TRUE. endif if ((self%channel_option .lt. 1 ) .or. (self%channel_option .gt. 3) ) then call hydro_stop('hydro.namelist ERROR: Invalid channel_option specified') endif endif if ((self%CHANRTSWCRT .eq. 1) .and. (self%channel_option .lt. 3) ) then if (len(trim(self%route_link_f)) .eq. 0) then call hydro_stop("hydro.namelist ERROR: Please specify a route_link_f file.") else inquire(file=trim(self%route_link_f),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: route_link_f not found.') endif endif if ((self%bucket_loss .lt. 0 ) .or. (self%bucket_loss .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid bucket_loss specified') endif if ((self%bucket_loss .eq. 1 ) .and. (self%UDMP_OPT .ne. 1) ) then call hydro_stop('hydro.namelist ERROR: Bucket loss only available when UDMP=1') endif if ((self%GWBASESWCRT .lt. 0 ) .or. (self%GWBASESWCRT .gt. 4) ) then call hydro_stop('hydro.namelist ERROR: Invalid GWBASESWCRT specified') endif if ((self%GWBASESWCRT .eq. 1 ) .or. (self%GWBASESWCRT .eq. 4) ) then if(len(trim(self%GWBUCKPARM_file)) .eq. 0) then call hydro_stop("hydro.namelist ERROR: Please specify a GWBUCKPARM_file file.") else inquire(file=trim(self%GWBUCKPARM_file),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: GWBUCKPARM_file not found.') endif endif if ((self%GWBASESWCRT .gt. 0) .and. (self%UDMP_OPT .ne. 1) ) then if(len(trim(self%gwbasmskfil)) .eq. 0) then call hydro_stop("hydro.namelist ERROR: Please specify a gwbasmskfil file.") else inquire(file=trim(self%gwbasmskfil),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: gwbasmskfil not found.') endif endif if ((self%UDMP_OPT .lt. 0 ) .or. (self%UDMP_OPT .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid UDMP_OPT specified') endif if (self%UDMP_OPT .gt. 0) then if(len(trim(self%udmap_file)) .eq. 0) then call hydro_stop("hydro.namelist ERROR: Please specify a udmap_file file.") else inquire(file=trim(self%udmap_file),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: udmap_file not found.') endif endif if ((self%UDMP_OPT .eq. 1) .and. (self%CHANRTSWCRT .eq. 0) ) then call hydro_stop('hydro.namelist ERROR: User-defined mapping requires channel routing on.') endif if ((self%outlake .ne. 0) .or. (self%lake_option > 0)) then if (len(trim(self%route_lake_f)) .eq. 0) then call hydro_stop('hydro.namelist ERROR: You MUST specify a route_lake_f to output and/or run lakes.') endif endif if (len(trim(self%route_lake_f)) .ne. 0) then inquire(file=trim(self%route_lake_f),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: specified route_lake_f ('//trim(self%route_lake_f)//') not found.') endif if ((self%channel_option .eq. 3) .and. (self%compound_channel)) then call hydro_stop("Compound channel option not available for diffusive wave routing. ") end if if ((self%lake_option .lt. 0) .or. (self%lake_option .gt. 3)) then print *, self%lake_option call hydro_stop("Lake Option must be 0 [lakes off], 1 [level pool], or 2 [passthrough], or 3 [reservoir DA]") end if if (self%reservoir_type_specified) then if (len(trim(self%reservoir_parameter_file)) .eq. 0) then call hydro_stop('hydro.namelist ERROR: You MUST specify a reservoir_parameter_file for & inputs to reservoirs that are not level pool type.') endif if (len(trim(self%reservoir_parameter_file)) .ne. 0) then inquire(file=trim(self%reservoir_parameter_file),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: reservoir_parameter_file not found.') endif end if if (self%reservoir_persistence_usgs) then if (len(trim(self%reservoir_usgs_timeslice_path)) .eq. 0) then call hydro_stop('hydro.namelist ERROR: You MUST specify a reservoir_usgs_timeslice_path for & reservoir USGS persistence capability.') endif if (len(trim(self%reservoir_parameter_file)) .ne. 0) then inquire(file=trim(self%reservoir_parameter_file),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: reservoir_parameter_file not found.') endif end if if (self%reservoir_persistence_usace) then if (len(trim(self%reservoir_usace_timeslice_path)) .eq. 0) then call hydro_stop('hydro.namelist ERROR: You MUST specify a reservoir_usace_timeslice_path for & reservoir USACE persistence capability.') endif if (len(trim(self%reservoir_parameter_file)) .ne. 0) then inquire(file=trim(self%reservoir_parameter_file),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: reservoir_parameter_file not found.') endif end if if (self%reservoir_rfc_forecasts) then if (len(trim(self%reservoir_parameter_file)) .eq. 0) then call hydro_stop('hydro.namelist ERROR: You MUST specify a reservoir_parameter_file for inputs to rfc forecast type reservoirs.') endif if (len(trim(self%reservoir_rfc_forecasts_time_series_path)) .eq. 0) then call hydro_stop('hydro.namelist ERROR: You MUST specify a reservoir_rfc_forecasts_time_series_path for reservoir rfc forecast capability.') endif if (len(trim(self%reservoir_parameter_file)) .ne. 0) then inquire(file=trim(self%reservoir_parameter_file),exist=fileExists) if (.not. fileExists) call hydro_stop('hydro.namelist ERROR: reservoir_parameter_file not found.') endif end if if ((self%imperv_adj .lt. 0 ) .or. (self%imperv_adj .gt. 1) ) then call hydro_stop('hydro.namelist ERROR: Invalid imperv_adj specified') endif end subroutine rt_nlst_check subroutine init_namelist_rt_field(did) implicit none integer, intent(in) :: did integer ierr character(len=512) :: msg integer:: RT_OPTION, CHANRTSWCRT, channel_option, & SUBRTSWCRT,OVRTSWCRT,AGGFACTRT, & GWBASESWCRT, GW_RESTART,RSTRT_SWC,TERADJ_SOLAR, & sys_cpl, rst_typ, rst_bi_in, rst_bi_out, & gwChanCondSw, GwPreCycles, GwSpinCycles, GwPreDiagInterval, gwsoilcpl, & UDMP_OPT, io_form_outputs, bucket_loss, imperv_adj real:: DTRT_TER,DTRT_CH,dxrt, gwChanCondConstIn, gwChanCondConstOut, gwIhShift character(len=256) :: route_topo_f="" character(len=256) :: route_chan_f="" character(len=256) :: route_link_f="" logical :: compound_channel integer :: channel_loss_option = 0 character(len=256) :: route_lake_f="" integer :: lake_option !0: lakes off 1: level pool 2: passthrough, 3: reservoir da logical :: reservoir_persistence_usgs logical :: reservoir_persistence_usace character(len=256) :: reservoir_parameter_file="" character(len=256) :: reservoir_usgs_timeslice_path="" character(len=256) :: reservoir_usace_timeslice_path="" integer :: reservoir_observation_lookback_hours = 24 integer :: reservoir_observation_update_time_interval_seconds = 86400 logical :: reservoir_rfc_forecasts character(len=256) :: reservoir_rfc_forecasts_time_series_path="" integer :: reservoir_rfc_forecasts_lookback_hours = 28 logical :: reservoir_type_specified character(len=256) :: route_direction_f="" character(len=256) :: route_order_f="" character(len=256) :: gwbasmskfil ="" character(len=256) :: gwstrmfil ="" character(len=256) :: geo_finegrid_flnm ="" character(len=256) :: udmap_file ="" character(len=256) :: GWBUCKPARM_file = "" integer :: reservoir_data_ingest ! STUB FOR USE OF REALTIME RESERVOIR DISCHARGE DATA. CURRENTLY NOT IN USE. integer :: SOLVEG_INITSWC real*8 :: out_dt, rst_dt character(len=256) :: RESTART_FILE = "" character(len=256) :: hydrotbl_f = "" logical :: GwPreDiag, GwSpinUp integer :: split_output_count, order_to_write integer :: igrid, io_config_outputs, t0OutputFlag, output_channelBucket_influx character(len=256) :: geo_static_flnm = "" character(len=1024) :: land_spatial_meta_flnm = "" integer :: DEEPGWSPIN integer :: i integer ::CHRTOUT_DOMAIN ! Netcdf point timeseries output at all channel points integer ::CHRTOUT_GRID ! Netcdf grid of channel streamflow values integer ::LSMOUT_DOMAIN ! Netcdf grid of variables passed between LSM and routing components integer ::RTOUT_DOMAIN ! Netcdf grid of terrain routing variables on routing grid integer :: output_gw integer :: outlake integer :: frxst_pts_out ! ASCII text file of streamflow at forecast points integer :: CHANOBS_DOMAIN ! NetCDF point timeseries output at forecast points. !!! add the following two dummy variables integer :: NSOIL real :: ZSOIL8(8) type(crocus_options) :: crocus_opts logical :: dir_e character(len=1024) :: reservoir_obs_dir #ifdef WRF_HYDRO_NUDGING character(len=256) :: nudgingParamFile character(len=256) :: netwkReExFile logical :: readTimesliceParallel logical :: temporalPersistence logical :: persistBias logical :: biasWindowBeforeT0 character(len=256) :: nudgingLastObsFile character(len=256) :: timeSlicePath integer :: nLastObs integer :: minNumPairsBiasPersist integer :: maxAgePairsBiasPersist logical :: invDistTimeWeightBias logical :: noConstInterfBias #endif namelist /HYDRO_nlist/ NSOIL, ZSOIL8,& RESTART_FILE,SPLIT_OUTPUT_COUNT,IGRID,& geo_static_flnm, & land_spatial_meta_flnm, & out_dt, rst_dt, & DEEPGWSPIN, SOLVEG_INITSWC, & RT_OPTION, CHANRTSWCRT, channel_option, & SUBRTSWCRT,OVRTSWCRT,AGGFACTRT, dtrt_ter,dtrt_ch,dxrt,& GwSpinCycles, GwPreCycles, GwSpinUp, GwPreDiag, GwPreDiagInterval, gwIhShift, & GWBASESWCRT, gwChanCondSw, gwChanCondConstIn, gwChanCondConstOut , & route_topo_f,route_chan_f,route_link_f, compound_channel, channel_loss_option, lake_option, route_lake_f, & route_direction_f,route_order_f,gwbasmskfil, & geo_finegrid_flnm, gwstrmfil,GW_RESTART,RSTRT_SWC,TERADJ_SOLAR, sys_cpl, & order_to_write , rst_typ, rst_bi_in, rst_bi_out, gwsoilcpl, & CHRTOUT_DOMAIN,CHANOBS_DOMAIN,CHRTOUT_GRID,LSMOUT_DOMAIN,& RTOUT_DOMAIN, output_gw, outlake, & frxst_pts_out, udmap_file, UDMP_OPT, GWBUCKPARM_file, bucket_loss, & io_config_outputs, io_form_outputs, hydrotbl_f, t0OutputFlag, output_channelBucket_influx, imperv_adj namelist /reservoir_nlist/ & reservoir_persistence_usgs, reservoir_persistence_usace, reservoir_parameter_file, reservoir_usgs_timeslice_path, & reservoir_usace_timeslice_path, reservoir_observation_lookback_hours, reservoir_observation_update_time_interval_seconds, & reservoir_rfc_forecasts, reservoir_rfc_forecasts_time_series_path, reservoir_rfc_forecasts_lookback_hours, & reservoir_type_specified #ifdef WRF_HYDRO_NUDGING namelist /NUDGING_nlist/ nudgingParamFile, netwkReExFile, & readTimesliceParallel, temporalPersistence, & persistBias, nudgingLastObsFile, & timeSlicePath, nLastObs, & minNumPairsBiasPersist, maxAgePairsBiasPersist, & biasWindowBeforeT0, invDistTimeWeightBias, & noConstInterfBias #endif !! ---- End definitions ---- ! Default values for HYDRO_nlist UDMP_OPT = 0 rst_bi_in = 0 rst_bi_out = 0 io_config_outputs = 0 io_form_outputs = 0 frxst_pts_out = 0 CHANOBS_DOMAIN = 0 t0OutputFlag = 1 output_channelBucket_influx = 0 TERADJ_SOLAR = 0 reservoir_data_ingest = 0 ! STUB FOR USE OF REALTIME RESERVOIR DISCHARGE DATA. CURRENTLY NOT IN USE. compound_channel = .FALSE. channel_loss_option = 0 bucket_loss = 0 lake_option = -99 reservoir_persistence_usgs = .FALSE. reservoir_persistence_usace = .FALSE. reservoir_observation_lookback_hours = 18 reservoir_observation_update_time_interval_seconds = 86400 reservoir_rfc_forecasts = .FALSE. reservoir_rfc_forecasts_lookback_hours = 24 reservoir_type_specified = .FALSE. imperv_adj = 0 #ifdef WRF_HYDRO_NUDGING ! Default values for NUDGING_nlist nudgingParamFile = "DOMAIN/nudgingParams.nc" netwkReExFile = "DOMAIN/netwkReExFile.nc" readTimesliceParallel = .true. temporalPersistence = .true. persistBias = .false. biasWindowBeforeT0 = .false. nudgingLastObsFile = "" timeSlicePath = "./nudgingTimeSliceObs/" nLastObs = 960 minNumPairsBiasPersist = 8 maxAgePairsBiasPersist = -99999 invDistTimeWeightBias = .false. noConstInterfBias = .false. #endif ! #ifdef MPP_LAND ! if(IO_id .eq. my_id) then ! #endif #ifndef NCEP_WCOSS open(12, file="hydro.namelist", form="FORMATTED") #else open(12, form="FORMATTED") #endif read(12, HYDRO_nlist, iostat=ierr, iomsg=msg) if(ierr .ne. 0) call hydro_stop("HYDRO_nlst namelist error in read_rt_nlst: " // trim(msg)) if (lake_option == 3) then read(12, reservoir_nlist, iostat=ierr, iomsg=msg) if (ierr /= 0) call hydro_stop("reservoir_nlist namelist error in read_rt_nlst: " // trim(msg)) end if #ifdef WRF_HYDRO_NUDGING read(12, NUDGING_nlist, iostat=ierr, iomsg=msg) if(ierr .ne. 0) call hydro_stop("NUDGING_nlst namelist error in read_rt_nlst: " // trim(msg)) !! Conditional default values for nuding_nlist if(maxAgePairsBiasPersist .eq. -99999) maxAgePairsBiasPersist = -1*nLastObs #endif close(12) call read_crocus_namelist(crocus_opts) ! #ifdef MPP_LAND ! endif ! #endif ! ADCHANGE: move these checks to more universal namelist checks... if ( io_config_outputs .eq. 4 ) RTOUT_DOMAIN = 0 if(output_channelBucket_influx .ne. 0) then if(nlst(did)%dt .ne. out_dt*60) & call hydro_stop("read_rt_nlst:: output_channelBucket_influx =! 0 inconsistent with out_dt and NOAH_TIMESTEP choices.") if(output_channelBucket_influx .eq. 2 .and. GWBASESWCRT .ne. 1 .and. GWBASESWCRT .ne. 2 .and. GWBASESWCRT .ne. 4) & call hydro_stop("read_rt_nlst:: output_channelBucket_influx = 2 but GWBASESWCRT != 1 or 2.") end if if(CHANRTSWCRT .eq. 0 .and. channel_option .lt. 3) channel_option = 3 !used to be broadcasted with MPI !nlst(did)%NSOIL = NSOIL !allocate(nlst(did)%ZSOIL8(NSOIL)) !nlst(did)%ZSOIL8 = ZSOIL8 nlst(did)%RESTART_FILE = RESTART_FILE nlst(did)%hydrotbl_f = trim(hydrotbl_f) nlst(did)%SPLIT_OUTPUT_COUNT = SPLIT_OUTPUT_COUNT nlst(did)%IGRID = IGRID nlst(did)%io_config_outputs = io_config_outputs nlst(did)%io_form_outputs = io_form_outputs nlst(did)%t0OutputFlag = t0OutputFlag nlst(did)%output_channelBucket_influx = output_channelBucket_influx nlst(did)%geo_static_flnm = geo_static_flnm nlst(did)%land_spatial_meta_flnm = land_spatial_meta_flnm nlst(did)%out_dt = out_dt nlst(did)%rst_dt = rst_dt nlst(did)%DEEPGWSPIN = DEEPGWSPIN nlst(did)%SOLVEG_INITSWC = SOLVEG_INITSWC nlst(did)%reservoir_obs_dir = "testDirectory" if (lake_option == 3) then if (reservoir_persistence_usgs .or. reservoir_persistence_usace .or. reservoir_rfc_forecasts) then reservoir_type_specified = .TRUE. else print *, "WARNING: lake_option = 3 (Reservoir DA), but no specific DA option was enabled. Setting lake_option to 1." end if lake_option = 1 ! set to 1 either way end if if (lake_option == -99) then if (route_lake_f /= "") then print *, "WARNING: lake_option not specified, but route_lake_f specified. Setting lake_option to 1." lake_option = 1 else lake_option = 0 end if end if nlst(did)%lake_option = lake_option nlst(did)%reservoir_persistence_usgs = reservoir_persistence_usgs nlst(did)%reservoir_persistence_usace = reservoir_persistence_usace nlst(did)%reservoir_parameter_file = reservoir_parameter_file nlst(did)%reservoir_usgs_timeslice_path = reservoir_usgs_timeslice_path nlst(did)%reservoir_usace_timeslice_path = reservoir_usace_timeslice_path nlst(did)%reservoir_observation_lookback_hours = reservoir_observation_lookback_hours nlst(did)%reservoir_observation_update_time_interval_seconds = reservoir_observation_update_time_interval_seconds nlst(did)%reservoir_rfc_forecasts = reservoir_rfc_forecasts nlst(did)%reservoir_rfc_forecasts_time_series_path = reservoir_rfc_forecasts_time_series_path nlst(did)%reservoir_rfc_forecasts_lookback_hours = reservoir_rfc_forecasts_lookback_hours nlst(did)%reservoir_type_specified = reservoir_type_specified write(nlst(did)%hgrid,'(I1)') igrid if(RESTART_FILE .eq. "") rst_typ = 0 if(rst_bi_out .eq. 1) then ! This part works for intel not pgi ! inquire(directory='restart', exist=dir_e) inquire(file='restart/.', exist=dir_e) if(.not. dir_e) then call system('mkdir restart') endif endif if(channel_option .eq. 4) then CHANRTSWCRT = 0 OVRTSWCRT = 0 SUBRTSWCRT = 0 endif nlst(did)%CHRTOUT_DOMAIN = CHRTOUT_DOMAIN nlst(did)%CHANOBS_DOMAIN = CHANOBS_DOMAIN nlst(did)%output_gw = output_gw nlst(did)%outlake = outlake nlst(did)%frxst_pts_out = frxst_pts_out nlst(did)%CHRTOUT_GRID = CHRTOUT_GRID nlst(did)%LSMOUT_DOMAIN = LSMOUT_DOMAIN nlst(did)%RTOUT_DOMAIN = RTOUT_DOMAIN nlst(did)%RT_OPTION = RT_OPTION nlst(did)%CHANRTSWCRT = CHANRTSWCRT nlst(did)%GW_RESTART = GW_RESTART nlst(did)%RSTRT_SWC = RSTRT_SWC nlst(did)%channel_option = channel_option nlst(did)%DTRT_TER = DTRT_TER nlst(did)%DTRT_CH = DTRT_CH nlst(did)%DTCT = DTRT_CH ! small time step for grid based channel routing ! Some fields haven't been initialized yet (e.g. DT) if(nlst(did)%DT .lt. DTRT_CH) then print*, "nlst(did)%DT, DTRT_CH = ",nlst(did)%DT, DTRT_CH print*, "reset DTRT_CH=nlst(did)%DT " DTRT_CH=nlst(did)%DT endif if(nlst(did)%DT .lt. DTRT_TER) then print*, "nlst(did)%DT, DTRT_TER = ",nlst(did)%DT, DTRT_TER print*, "reset DTRT_TER=nlst(did)%DT " DTRT_TER=nlst(did)%DT endif if (modulo(nlst(did)%DT, DTRT_TER) /= 0) then print*, "nlst(did)%DT, DTRT_TER = ",nlst(did)%DT, DTRT_TER call hydro_stop("module_namelist: DT not a multiple of DTRT_TER") endif if (modulo(nlst(did)%DT, DTRT_CH) /= 0) then print*, "nlst(did)%DT, DTRT_CH = ",nlst(did)%DT, DTRT_CH call hydro_stop("module_namelist: DT not a multiple of DTRT_CH") endif nlst(did)%act_lev = crocus_opts%act_lev nlst(did)%SUBRTSWCRT = SUBRTSWCRT nlst(did)%OVRTSWCRT = OVRTSWCRT nlst(did)%dxrt0 = dxrt nlst(did)%AGGFACTRT = AGGFACTRT nlst(did)%GWBASESWCRT = GWBASESWCRT nlst(did)%bucket_loss = bucket_loss nlst(did)%GWSOILCPL= GWSOILCPL nlst(did)%gwChanCondSw = gwChanCondSw nlst(did)%gwChanCondConstIn = gwChanCondConstIn nlst(did)%gwChanCondConstOut = gwChanCondConstOut nlst(did)%gwIhShift = gwIhShift nlst(did)%GwSpinCycles = GwSpinCycles nlst(did)%GwPreCycles = GwPreCycles nlst(did)%GwPreDiag = GwPreDiag nlst(did)%GwSpinUp = GwSpinUp nlst(did)%GwPreDiagInterval = GwPreDiagInterval nlst(did)%TERADJ_SOLAR = TERADJ_SOLAR nlst(did)%sys_cpl = sys_cpl nlst(did)%rst_typ = rst_typ nlst(did)%rst_bi_in = rst_bi_in nlst(did)%rst_bi_out = rst_bi_out nlst(did)%order_to_write = order_to_write nlst(did)%compound_channel = compound_channel nlst(did)%channel_loss_option = channel_loss_option nlst(did)%imperv_adj = imperv_adj ! files nlst(did)%route_topo_f = route_topo_f nlst(did)%route_chan_f = route_chan_f nlst(did)%route_link_f = route_link_f nlst(did)%route_lake_f = route_lake_f nlst(did)%reservoir_persistence_usgs = reservoir_persistence_usgs nlst(did)%reservoir_persistence_usace = reservoir_persistence_usace nlst(did)%reservoir_parameter_file = reservoir_parameter_file nlst(did)%reservoir_usgs_timeslice_path = reservoir_usgs_timeslice_path nlst(did)%reservoir_usace_timeslice_path = reservoir_usace_timeslice_path nlst(did)%reservoir_observation_lookback_hours = reservoir_observation_lookback_hours nlst(did)%reservoir_observation_update_time_interval_seconds = reservoir_observation_update_time_interval_seconds nlst(did)%reservoir_rfc_forecasts = reservoir_rfc_forecasts nlst(did)%reservoir_rfc_forecasts_time_series_path = reservoir_rfc_forecasts_time_series_path nlst(did)%reservoir_rfc_forecasts_lookback_hours = reservoir_rfc_forecasts_lookback_hours nlst(did)%route_direction_f = route_direction_f nlst(did)%route_order_f = route_order_f nlst(did)%gwbasmskfil = gwbasmskfil nlst(did)%gwstrmfil = gwstrmfil nlst(did)%geo_finegrid_flnm = geo_finegrid_flnm nlst(did)%udmap_file = udmap_file nlst(did)%UDMP_OPT = UDMP_OPT nlst(did)%GWBUCKPARM_file = GWBUCKPARM_file nlst(did)%reservoir_data_ingest = 0 ! STUB FOR USE OF REALTIME RESERVOIR DISCHARGE DATA. CURRENTLY NOT IN USE. nlst(did)%reservoir_obs_dir = 'testDirectory' #ifdef WRF_HYDRO_NUDGING nlst(did)%nudgingParamFile = nudgingParamFile write(*,*) 'Nudging param file ',nudgingParamFile nlst(did)%netWkReExFile = netWkReExFile nlst(did)%readTimesliceParallel = readTimesliceParallel nlst(did)%temporalPersistence = temporalPersistence nlst(did)%persistBias = persistBias nlst(did)%biasWindowBeforeT0 = biasWindowBeforeT0 nlst(did)%nudgingLastObsFile = nudgingLastObsFile nlst(did)%timeSlicePath = timeSlicePath nlst(did)%nLastObs = nLastObs nlst(did)%minNumPairsBiasPersist = minNumPairsBiasPersist nlst(did)%maxAgePairsBiasPersist = maxAgePairsBiasPersist nlst(did)%invDistTimeWeightBias = invDistTimeWeightBias nlst(did)%noConstInterfBias = noConstInterfBias #endif ! if lakes have been disabled (lake_option == 0), clear the route_lake_f and output_lakes options if (nlst(did)%lake_option == 0) then nlst(did)%route_lake_f = '' nlst(did)%outlake = 0 end if call nlst(did)%check() ! derive rtFlag nlst(did)%rtFlag = 1 if(channel_option .eq. 4) nlst(did)%rtFlag = 0 ! if(CHANRTSWCRT .eq. 0 .and. SUBRTSWCRT .eq. 0 .and. OVRTSWCRT .eq. 0 .and. GWBASESWCRT .eq. 0) nlst(did)%rtFlag = 0 if(SUBRTSWCRT .eq. 0 .and. OVRTSWCRT .eq. 0 .and. GWBASESWCRT .eq. 0) nlst(did)%rtFlag = 0 end subroutine init_namelist_rt_field subroutine init_wrf_hydro() implicit none integer :: ierr integer :: finemesh, finemesh_factor integer :: forc_typ, snow_assim namelist /WRF_HYDRO_OFFLINE/ & !LRK - Remove HRLDAS_ini_typ and GEO_STATIC_FLNM for WRF-Hydro finemesh,finemesh_factor,forc_typ, snow_assim !finemesh,finemesh_factor,forc_typ, snow_assim , GEO_STATIC_FLNM, HRLDAS_ini_typ #ifndef NCEP_WCOSS read(30, NML=WRF_HYDRO_OFFLINE, iostat=ierr) #else read(11, NML=WRF_HYDRO_OFFLINE, iostat=ierr) #endif if (ierr /= 0) then write(*,'(/," ***** ERROR: Problem reading namelist WRF_HYDRO_OFFLINE",/)') call hydro_stop (" FATAL ERROR: Problem reading namelist WRF_HYDRO_OFFLINE") endif #ifndef NCEP_WCOSS close(30) #else close(11) #endif wrf_hydro%finemesh = finemesh wrf_hydro%finemesh_factor = finemesh_factor wrf_hydro%forc_typ = forc_typ wrf_hydro%snow_assim = snow_assim end subroutine init_wrf_hydro subroutine init_noah_lsm_and_wrf_hydro() implicit none character(len=256) :: indir integer :: nsoil ! number of soil layers type(crocus_options) :: crocus_opts integer :: forcing_timestep integer :: noah_timestep integer :: start_year integer :: start_month integer :: start_day integer :: start_hour integer :: start_min character(len=256) :: outdir = "." character(len=256) :: restart_filename_requested = " " integer :: restart_frequency_hours integer :: output_timestep character(len=256) :: forcing_name_T = "T2D" character(len=256) :: forcing_name_Q = "Q2D" character(len=256) :: forcing_name_U = "U2D" character(len=256) :: forcing_name_V = "V2D" character(len=256) :: forcing_name_P = "PSFC" character(len=256) :: forcing_name_LW = "LWDOWN" character(len=256) :: forcing_name_SW = "SWDOWN" character(len=256) :: forcing_name_PR = "RAINRATE" character(len=256) :: forcing_name_SN = "" character(len=256) :: forcing_name_LF = "" integer :: dynamic_veg_option integer :: canopy_stomatal_resistance_option integer :: btr_option integer :: runoff_option integer :: surface_drag_option integer :: supercooled_water_option integer :: frozen_soil_option integer :: radiative_transfer_option integer :: snow_albedo_option integer :: pcp_partition_option integer :: tbot_option integer :: temp_time_scheme_option integer :: glacier_option integer :: surface_resistance_option integer :: soil_data_option = 1 integer :: pedotransfer_option = 0 integer :: crop_option = 0 integer :: imperv_option = 9 integer :: split_output_count = 1 integer :: khour = -999 integer :: kday = -999 real :: zlvl character(len=256) :: hrldas_setup_file = " " character(len=256) :: mmf_runoff_file = " " character(len=256) :: external_veg_filename_template = " " character(len=256) :: external_lai_filename_template = " " integer :: xstart = 1 integer :: ystart = 1 integer :: xend = 0 integer :: yend = 0 REAL, DIMENSION(MAX_SOIL_LEVELS) :: soil_thick_input ! depth to soil interfaces from namelist [m] integer :: rst_bi_out, rst_bi_in !0: default netcdf format. 1: binary write/read by each core. CHARACTER(LEN = 256) :: spatial_filename integer :: ierr = 0 integer :: finemesh, finemesh_factor integer :: forc_typ, snow_assim namelist / NOAHLSM_OFFLINE / & indir, nsoil, soil_thick_input, forcing_timestep, noah_timestep, & start_year, start_month, start_day, start_hour, start_min, & outdir, & restart_filename_requested, restart_frequency_hours, output_timestep, & forcing_name_T,forcing_name_Q,forcing_name_U,forcing_name_V,forcing_name_P, & forcing_name_LW,forcing_name_SW,forcing_name_PR,forcing_name_SN,forcing_name_LF, & dynamic_veg_option, canopy_stomatal_resistance_option, & btr_option, runoff_option, surface_drag_option, supercooled_water_option, & frozen_soil_option, radiative_transfer_option, snow_albedo_option, & pcp_partition_option, tbot_option, temp_time_scheme_option, & glacier_option, surface_resistance_option, & soil_data_option, pedotransfer_option, crop_option, & imperv_option, & split_output_count, & khour, kday, zlvl, hrldas_setup_file, mmf_runoff_file, & spatial_filename, & external_veg_filename_template, external_lai_filename_template, & xstart, xend, ystart, yend, rst_bi_out, rst_bi_in namelist /WRF_HYDRO_OFFLINE/ & finemesh,finemesh_factor,forc_typ, snow_assim noah_lsm%nsoil = -999 noah_lsm%soil_thick_input = -999 ! dtbl = -999 noah_lsm%start_year = -999 noah_lsm%start_month = -999 noah_lsm%start_day = -999 noah_lsm%start_hour = -999 noah_lsm%start_min = -999 noah_lsm%khour = -999 noah_lsm%kday = -999 noah_lsm%zlvl = -999 noah_lsm%forcing_timestep = -999 noah_lsm%noah_timestep = -999 noah_lsm%output_timestep = -999 noah_lsm%restart_frequency_hours = -999 write(*,*) 'Calling config noahlsm_offline' #ifndef NCEP_WCOSS open(30, file="namelist.hrldas", form="FORMATTED") read(30, NML=NOAHLSM_OFFLINE, iostat=ierr) #else open(11, form="FORMATTED") read(11, NML=NOAHLSM_OFFLINE, iostat=ierr) #endif if (ierr /= 0) then write(*,'(/," ***** ERROR: Problem reading namelist NOAHLSM_OFFLINE",/)') #ifndef NCEP_WCOSS rewind(30) read(30, NOAHLSM_OFFLINE) #else rewind(11) read(11, NOAHLSM_OFFLINE) #endif stop "FATAL ERROR: Problem reading namelist NOAHLSM_OFFLINE" endif #ifndef NCEP_WCOSS read(30, NML=WRF_HYDRO_OFFLINE, iostat=ierr) #else read(11, NML=WRF_HYDRO_OFFLINE, iostat=ierr) #endif if (ierr /= 0) then write(*,'(/," ***** ERROR: Problem reading namelist WRF_HYDRO_OFFLINE",/)') call hydro_stop (" FATAL ERROR: Problem reading namelist WRF_HYDRO_OFFLINE") endif #ifndef NCEP_WCOSS call read_crocus_namelist(crocus_opts, 30) #else call read_crocus_namelist(crocus_opts, 11) #endif #ifndef NCEP_WCOSS close(30) #else close(11) #endif wrf_hydro%finemesh = 0!finemesh wrf_hydro%finemesh_factor = 0!finemesh_factor wrf_hydro%forc_typ = forc_typ wrf_hydro%snow_assim = 0!snow_assim noah_lsm%indir = indir noah_lsm%nsoil = nsoil ! number of soil layers noah_lsm%crocus_opt = crocus_opts%crocus_opt noah_lsm%act_lev = crocus_opts%act_lev noah_lsm%forcing_timestep = forcing_timestep noah_lsm%noah_timestep = noah_timestep noah_lsm%start_year = start_year noah_lsm%start_month = start_month noah_lsm%start_day = start_day noah_lsm%start_hour = start_hour noah_lsm%start_min = start_min noah_lsm%outdir = outdir noah_lsm%restart_filename_requested = restart_filename_requested noah_lsm%restart_frequency_hours = restart_frequency_hours noah_lsm%output_timestep = output_timestep noah_lsm%forcing_name_T = forcing_name_T noah_lsm%forcing_name_Q = forcing_name_Q noah_lsm%forcing_name_U = forcing_name_U noah_lsm%forcing_name_V = forcing_name_V noah_lsm%forcing_name_P = forcing_name_P noah_lsm%forcing_name_LW = forcing_name_LW noah_lsm%forcing_name_SW = forcing_name_SW noah_lsm%forcing_name_PR = forcing_name_PR noah_lsm%forcing_name_SN = forcing_name_SN noah_lsm%forcing_name_LF = forcing_name_LF noah_lsm%dynamic_veg_option = dynamic_veg_option noah_lsm%canopy_stomatal_resistance_option = canopy_stomatal_resistance_option noah_lsm%btr_option = btr_option noah_lsm%runoff_option = runoff_option noah_lsm%surface_drag_option = surface_drag_option noah_lsm%supercooled_water_option = supercooled_water_option noah_lsm%frozen_soil_option = frozen_soil_option noah_lsm%radiative_transfer_option = radiative_transfer_option noah_lsm%snow_albedo_option = snow_albedo_option noah_lsm%pcp_partition_option = pcp_partition_option noah_lsm%tbot_option = tbot_option noah_lsm%temp_time_scheme_option = temp_time_scheme_option noah_lsm%glacier_option = glacier_option noah_lsm%surface_resistance_option = surface_resistance_option noah_lsm%soil_data_option = soil_data_option noah_lsm%pedotransfer_option = pedotransfer_option noah_lsm%crop_option = crop_option noah_lsm%imperv_option = imperv_option noah_lsm%split_output_count = split_output_count if (kday > 0) then if (khour > 0) then write(*, '("WARNING: Check Namelist: KHOUR and KDAY both defined, KHOUR will take precedence.")') kday = -999 else write(*, '("WARNING: KDAY is deprecated and may be removed in a future version, please use KHOUR.")') khour = -999 end if end if noah_lsm%kday = kday noah_lsm%khour = khour noah_lsm%zlvl = zlvl noah_lsm%hrldas_setup_file = hrldas_setup_file noah_lsm%mmf_runoff_file = " "!mmf_runoff_file noah_lsm%external_veg_filename_template = " "!external_veg_filename_template noah_lsm%external_lai_filename_template = " "!external_lai_filename_template noah_lsm%xstart = 1!xstart noah_lsm%ystart = 1!ystart noah_lsm%xend = 0!xend noah_lsm%yend = 0!yend noah_lsm%soil_thick_input = soil_thick_input noah_lsm%rst_bi_out = rst_bi_out noah_lsm%rst_bi_in = rst_bi_in noah_lsm%spatial_filename = spatial_filename end subroutine init_noah_lsm_and_wrf_hydro subroutine read_crocus_namelist(opt, f_in) type(crocus_options), intent(OUT) :: opt integer, intent(IN), optional :: f_in character(len=15) :: filename = "namelist.hrldas" logical :: f_exists integer :: crocus_opt, act_lev integer :: ierr, f_local namelist /CROCUS_nlist/ & crocus_opt, act_lev ! check if file is opened if (present(f_in)) then rewind(f_in) read(f_in, NML=CROCUS_nlist, iostat=ierr) else ! check that file exists inquire(file=filename, exist=f_exists) if (f_exists .eqv. .false.) & call hydro_stop (" FATAL ERROR: namelist.hrldas does not exist") open(newunit=f_local, file=filename, form="FORMATTED", iostat=ierr) read(f_local, NML=CROCUS_nlist, iostat=ierr) close(f_local) end if if ((ierr .ne. 0) .or. (crocus_opt .eq. 0)) & return if ((act_lev .gt. 50) .or. (act_lev .lt. 0)) then call hydro_stop (" FATAL ERROR: Crocus act_lev out of range of 0-50 ") end if opt%crocus_opt = crocus_opt if (crocus_opt == 0) then opt%act_lev = 0 else opt%act_lev = act_lev end if end subroutine read_crocus_namelist end module config_base